Stock Picker Forklifts
A stock picker forklift raises an operator up the rack to pull individual cases, but most order picking still happens at floor and low-shelf height, and that is the work this collection is built for. These are the manual stock picking carts and trucks a picker walks down the aisle, loading an order as they go. Valley Craft's cage carts wrap the deck in mesh so small and loose parts cannot slide off, rated to 1,600 lb. Vestil's multi-tier stock carts and easy-access stock trucks give you two or three open shelves for staged picks and kitting. Pricing runs from the mid $300s to about $1,000. Below is how to choose among the carts here.
Compare Stockpicker Trucks
| Model | Price | Capacity | |
|---|---|---|---|
| Valley Craft Stock Picking Cage Carts | $799 | 1,600 lb | View → |
| Vestil Easy-Access Steel Stock Trucks | $364 | 1,200 lb | View → |
| Vestil Multi-Tier Stock Carts | $352 | 200-300 lb | View → |
Stockpicker Trucks Buying Guide
Manual cart or powered order picker. A powered stock picker forklift, a Class II order selector, lifts the operator to rack height and belongs to a different budget and a training program under OSHA 1910.178. Nothing on this page is powered. These carts serve the ground-level picking that makes up most order-fill work: pull cases and parts from floor and low shelves, build the order on the cart, roll it to pack-out. If your picks sit above reach, a rolling warehouse ladder gets a picker to the shelf safely and costs a fraction of a powered unit. If you are moving loads that are already picked rather than picking them, platform trucks give you more deck per dollar.
Cage carts for loose and small parts. The Valley Craft Stock Picking Cage Carts put mesh sides around the deck, and that is the point: pins, fittings, small cartons, anything that would walk off an open shelf stays contained. Choose the 2-sided build for loading from an open end or the 3-sided build for maximum containment. Add one or two adjustable shelves to split the cage into tiers, or leave it open for tall stock. Rated to 1,600 lb, so a full order of steel hardware sits well inside the number. Grey, blue, or red lets you code carts by zone or department. Figure roughly $695 to $999 depending on sides, shelves, and finish.
Multi-tier and easy-access trucks for kitting. When picks are boxed or bagged rather than loose, open shelving beats a cage. The Vestil Multi-Tier Stock Carts give you two or three welded steel shelves, with optional wire baskets that corral smaller items without closing the cart in, starting around $352. The Vestil Easy-Access Steel Stock Trucks keep one end open so a picker reaches straight in without walking around the cart, and an optional work table turns the top into a place to scan, label, or assemble a kit, starting around $364. Both are lighter-duty and lower-cost than the Valley Craft cage, and both suit a repeatable pick-and-pack line.
Sizing the cart to the pick path. Match shelf count to the average order and the aisle. A short, dense pick list fills a three-shelf cart fast and keeps a picker from overloading one deck; a few large cases ride better on two open shelves or the cage floor. Watch turning radius in narrow aisles, and keep the loaded height low enough that the top pick does not block sightlines. For runs that mix loose parts and boxed goods, the cage cart with one shelf added covers both without a second trip. When the job outgrows manual picking, that is the signal to price a powered order picker, which sits outside this collection. For general low-shelf carts, the wider industrial carts and dollies range and the service carts cover the rest.
Frequently Asked Questions
A stock picker forklift, or order picker, is a Class II powered industrial truck that raises the operator up the rack to pick at height, and it requires operator certification under OSHA 1910.178. The carts in this collection are manual: a picker walks them down the aisle and pulls from floor and low-shelf level. They cover the ground-level order picking that most fulfillment still runs on, at a fraction of the cost and with no training program to stand up.
The Valley Craft Stock Picking Cage Cart. Mesh sides on two or three faces keep pins, fittings, and small cartons on the deck instead of on the floor. Add one or two adjustable shelves inside to tier the cage. It is rated to 1,600 lb, the heaviest capacity of the carts here.
Yes. The Valley Craft cage cart takes one or two adjustable shelves inside the cage. The Vestil Multi-Tier Stock Carts come in two- or three-shelf builds with optional wire baskets, and the Vestil Easy-Access Steel Stock Trucks add an optional work table on top for scanning, labeling, or kitting.
The Vestil multi-tier and easy-access trucks start in the mid $300s. The Valley Craft cage cart runs from about $695 to $999 depending on the number of sides, the shelves added, and the finish color. Freight and lead time are confirmed at checkout, and business leasing is available.
No. These are ground and low-shelf carts. Reaching a picker up to rack height is the job of a powered order picker or, for lighter and cheaper access, a rolling warehouse ladder. Use the cart to build the order at floor level and stage it for pack-out.